Tormach PCNC 1100. This is an older machine with low hours. It has been updated to a Series 3. Less than 5 hours of run time on new spindle. The machine runs off of Tormach's Path Pilot software, so you can do some conversational machining with it and not have the need for a CAM and CAD software. Has a touch screen and jog pendant. Has had new way covers in the last year. Has flood coolant and mist coolant. Also has custom chip tray and Tormach splash guard. Uses Tormach TTS Tooling or R8 tooling, NO tooling or vise included, I am keeping my tooling because I am buying a different mill. Machine runs on 220 Volt single phase power. The machine is about 4 feet deep, 5 feet wide, and about 82 inches tall, weighs about 1200 pounds. Can be disassembled to get into a basement. I have a forklift on site for loading. I will not ship, and I am not interested in trades. I have been using this machine for odd jobs, some prototyping, and making parts for my live steam trains. This is a great machine if you are wanting to get a start in CNC machining, Tormach has great support and service, and their tooling is very reasonably priced. Located in Hillsboro, Wisconsin. Price is $9,000